The main purpose work process analysis of the flame laminating machine

The main purpose work process analysis of the flame laminating machine

In simple terms, a compound machine is a compound equipment that combines two more materials together has a wide range of uses. the compound machine can be divided into many types according to different uses. Let us briefly introduce the characteristics uses of the flame compound machine.

The flame laminating machine is mainly used for the lamination of sponges other types of textile products. Its main feature is that it uses flame retardant sponge is used as a bonding material. In this process, no glue is used. It is melted bonded by flame spraying, has good application in the bonding of plush deerskin. the important point is to have the characteristics of environmental protection, good feel washing resistance.

Briefly understand the working process of the flame laminating machine.

1. Prepare

First, install the base material along the guide rollers according to the routing direction, at the same time, adjust the adhesive in proportion, start the heating system of the oven, when the corresponding set temperature is reached, turn on the drive motor to start coating Cloth production.

2. Coating

The base material of the unwinding device first passes through the anilox roller, after being coated with glue, then dried through the drying tunnel, that is, the coating process is completed.

3. Compound

Through EPC gas-liquid rectification, it enters into the composite part is bonded to the base material of the second unwinding part, thus achieving the composite process.

4. Cooling winding

After cooling winding, the entire production processing of the substrate is completed.

Pay attention to the following problems during production.

(1) Adjust the flatness of the substrate by adjusting the position of the deflection roller.

(2) Adjust the composite pressure between the composite rollers by adjusting the relative spacing between the two composite rollers.